Fein GRIT GXC Manual De Instrucciones página 15

Noise emission values.
A-weighted emission
pressure power level
measured at the work-
place L (re 20 μPa),
pA
in decibels
Measuring uncertainty
K , in decibels
pA
Measured A-weighted
sound power level L
wA
(re 1 pW), in decibels
Measuring uncertainty
K , in decibels
wA
Operating conditions
Speed (rpm)
Material
Dimension
Grinding belt
REMARK: The sum of the measured emission value and
respective measuring inaccuracy represents the upper
limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the
corresponding product standard (see last page in this
Instruction Manual).
Repair and customer service.
Before any work on the machine itself, pull the
mains plug.
Repairs may be carried out only by qualified per-
sons in conformity with the valid regulations.
For repairs, we recommend our FEIN customer service
centre, the FEIN authorised service centres and FEIN
agencies.
When the machine's power supply cable is damaged, it
must be replaced using a specially prepared power sup-
ply cable, available from your FEIN customer service
agent.
The current spare parts list of this machine can be found
on the Internet under www.fein.com.
Daily maintenance
Empty the coolant tank. Separate and dispose of cool-
ant and metal dust.
Clean the basin (14). If required, remove any clogs in
the drain system.
Cleaning the exterior of the machine with compressed
air.
Idle Sanding
83.5 94
4 4
93.5 100.5
2.5 2.5
3000 3000
– Stainless steel
Pipe, diametrer
– 42.4 mm
GRIT by Fein
– 120R
Warranty and liability.
The warranty for the product is valid in accordance
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's warranty dec-
laration.
The delivery scope of your machine may include only a
part of the accessories described or shown in this
instruction manual.
Declaration of conformity.
This CE declaration is only valid for European Union
and EFTA (European Free Trade Association) countries
and only for products intended for the EU- or EFTA
market. After placing the product on the EU market the
UKCA mark loses its mark validity.
The UKCA declaration is only valid for the Great
Britain market (England, Wales and Scotland) and only
for products intended for the Great Britain market.
After placing the product on the Great Britain market
the CE mark loses its mark validity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out machines and accessories should
be sorted for environment-friendly recycling.
Connection diagrams.
Type GXC Page 102
Type GXC2V Page 103
Type GXW Page 104
Type GXW2V Page 105
en
15