Settings - La Nordica ORIANA Manual Del Usuario

sETTINgs

Once the power cable is connected to the rear of the stove, the system remains inactive and a first screen appears on the panel with the
word OFF..
MAINs POWER FREQUENCY 50/ 60HZ
If the stove is installed in a country with a frequency of 60Hz, the display will show
described below.
CONTROls PROCEDURE:
• Press key 4,
• select the required frequency using keys 1 or 2.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
LANGUAGE
This menu allows the preferred language to be selected.
The available languages are: Italian - English - german - French - spanish - Portuguese.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• select the language using keys 1 or 2.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
DISPLAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. If set to OFF, the display backlighting is set
to maximum brightness and turns off after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in alarm status.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to set the desired intensity.
• Press key 4 to confirm and key 1 to scroll back through the menus until the initial page.
DELTA T
This function allows the setting of the sensitivity on the variation of temperature for the adjustment of the fan speed.
The possible values for delta t go from: 0,5 °C - 5 °C.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to set the desired value..
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
DEGREES
This menu allows you to set the unit of measure for the temperature..
The predefined value is °C.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to select Celsius or Fahrenheit.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
34
LANGUAGE appears and confirm by pressing key 4.
DISPLAY appears and confirm by pressing key 4.
DELTA T appears and confirm by pressing key 4.
DEGREES appears and confirm by pressing key 4.
"POWER FREQ.
ENgLIsH
ERROR". Change the frequency as