Motorola DTR720 Manual De Instrucciones página 49

Figure 6: Radio to Radio Cloning
1 Plug one side of the cloning cable micro-USB
connector to the first SUC and the other end to the
second SUC.
NOTE:
During the cloning process, no power is being
applied to the SUC. The batteries are not
charged. Only data communication is being
established between the two radios.
2 Turn on the Target Radio and place it into one of the
SUCs.
3 For the Source Radio, perform the following actions:
a Press the Menu/
OK→Advanced→Cloning→Radio Cloning
b Place the Source Radio in its SUC.
c Press the Menu/OK button.
The display shows Cloning....
If successful:
• The display shows Cloned Successfully.
If unsuccessful:
• The display shows Cloning Failed.
4 After completing the cloning process, exit the
'cloning' mode by long pressing the Home/Back
button.
English
49