English
Troubleshooting
The following table explains the ways to troubleshoot if the
symptom occurs.
11.1
Troubleshooting
Troubleshoot your radio using the method describe in the
table.
Table 19: Troubleshooting
If...
Then...
If there is no
recharge or replace the Li-ion bat-
power,
tery.
64
NOTE:
Extreme operating tem-
perature may affect bat-
tery life. See
Battery
Specifications on page
15.
If...
Then...
If CPS is unable
perform one of the following actions:
to read the ra-
•
Ensure that one side of the pro-
dio,
gramming cable is connected to
the radio,and the other side of
the programming cable is con-
nected to the USB port.
•
Verify that the switch on the pro-
gramming cable is set at Digital
position or Flash position in old-
er version programming cable.
•
Ensure that the radio is posi-
tioned correctly inside the Single
Unit Charger (SUC).
If the radio gen-
press the PTT button again when
erates continu-
receive mode ends.
ous tone when
pressing
thePTT button,
If the radio does
perform one of the following actions:
not transmit au-
•
Verify that nobody else is using
dio when press-
the channel and try again.