Over The Air Contact Cloning - Motorola DTR720 Manual De Instrucciones

a Press the Menu/
OK→Advanced→Cloning→Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
2 Power the Master Radio and perform the following
actions:.
a Press the Menu/
OK→Advanced→Cloning→Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
c Press the Menu/OK button.
The display shows Profile ID Cloning...
If successful:
• The display shows Cloned Successfully.
If unsuccessful:
• The display shows Cloning Failed.
NOTE:
• If target radio shows Cloning Failed using
Wireless Cloning feature, try again with distance
of at least 1 ft away from source radio.
7.5.5

Over The Air Contact Cloning

Over the Air (OTA) Contact Cloning feature allows you to
add or delete contacts to or from another radio wirelessly
without connecting the radios by cable.
You can clone over either private, private group, or public
group while the targeted slave radio contact can be either
private or private group. OTA contact cloning feature is
enabled through Customer Programming Software (CPS)
configuration.
Cloned contact replaces the contact in the slave radio if
the existing contact has the same private ID, channel ID, or
same name.
If a contact is mapped to a channel and Direct Call,
removing the contact resets the channel to default channel
ID and name.
English
51