Trouble Shooting; Error Correction - Parkside PDOS 200 B2 Traduction Des Instructions Originales

All manuals and user guides at all-guides.com

Trouble Shooting

Always disconnect the plug from the mains socket before working.
Danger of electric shock.
Problem
Device doesn't start
Grinding tools do
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Possible Cause
Mains voltage missing
Main circuit breaker is tripped
On/off switch ( 14) may be
defective
Engine faulty
Grinding disc nut (
loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut (
loose
Grinding disc ( 10) faulty
Spark protection (1) or work-
piece support ( 11) set
incorrectly

Error correction

Check the socket, mains cable,
line, mains plug, repairs to be
cian if necessary, check main
circuit breaker.
Repair by Customer Care
Tighten grinding disc nut (see
10a)
„Changing the grinding disc")
Remove blockages
Reduce pressure on grinding tool
Workpiece unsuitable
10a) Tighten grinding disc nut (see
„Changing the grinding disc")
Change grinding disc
Set spark protection or work-
piece support (see „Assembly")
G B I E
-
3 1