Eco Button; Auto Mode; Adjusting Air Flow Direction - Ferroli FCM Manual De Uso

USE
Fig . 5

ECO BUTTON

Pressing the "ECO" key (Fig . 5) prepares the machine for night
mode by displaying the symbol on the display . The setting tem-
perature increases (cooling operation "COOL") or decreases
(heating operation "HEAT"), 1 ° C at pre-set intervals with a ma-
ximum of 2 ° C .

AUTO MODE

During AUTO operation, the unit automatically selects HEAT, FAN, COLD depending on the ambient temperature.
Activation of the AUTO mode:
First select the AUTO mode on the remote control using the MODE key . Then select the desired setting tempera-
ture. The mode of operation will depend on the difference, positive or negative, between the set temperature and
the ambient temperature. If this difference does not exceed the degree, the unit is activated only in the ventilation
mode .
Note on AUTO operation
1. In "AUTO" mode, the unit can automatically switch between cooling, ventilation and heating modes by detecting
the difference between the ambient temperature and the temperature set on the remote control .
2. In the "AUTO" mode, the fan speed can not be selected, which is set automatically.
3. If you feel that the "AUTO" mode does not guarantee the necessary comfort, you can manually select the
desired mode .

ADJUSTING AIR FLOW DIRECTION

When the deflector is turned on it assumes a predetermined angle.
To regulate the direction of the air flow (Fig. 1) leaving the unit press the "AIR DIRECTION" button (Fig.2);
Fig . 1 Fig . 2 Fig . 3
Pressing the "SWING" button (Fig. 3) the deflector continues to move by mixing ambient air. By pressing the key
a second time, the deflector locks.
8