Timer Setting; Adjusting The Current Time - Ferroli FCM Manual De Uso

TIMER SETTING

Press the "TIME ON" button to set the auto power on time .
Press the "TIME OFF" button to set the auto-off time of the unit .
Setting the automatic start time .
1 . Press the "TIMER ON" button (Fig .4a) .
2 . Each time the "TIMER ON" button is pressed, the time increases by 30 minutes
between 0 and 10 hours, while the increase is one hour between 10 and 24 hours.
3 . Once the timer has been selected, hold the remote for a few seconds for the settings to be sent to the unit.
4 . To cancel the setting, set the time value to 0.00
Setting the automatic shutdown time .
1 . Press the "TIMER OFF" button (Fig .4b) .
2 . Each time the button is pressed "TIMER OFF" the time increases by 30 minutes between 0 and 10 hours, while
the increase is one hour between 10 and 24 hours .
3 . Once the timer has been selected, hold the remote for a few seconds for the settings to be sent to the unit.
4 . To cancel the setting, set the time value to 0.00
WARNING
• When timer operation is selected, the remote control automatically transmits the timer signal to the internal unit at
the specified time. It is therefore recommended to place the remote control in a location from which it can properly
transmit the signal to the internal unit .
• The actual start time that can be set using the remote control's timer function is limited at half-hour intervals .

ADJUSTING THE CURRENT TIME

The first time the timer is turned on, it shows
12:00. To update the time, press and hold
CLOCK (Fig . 5) for 5 seconds . The hour indica-
tor flashes. Use the "▼" and "▲" keys to chan-
ge the time . Press the CLOCK button again to
change the minute value. Confirm the setting
with the OK button (Fig . 6) .
USE
Fig . 5
Fig . 4
a
b
Fig . 6
9