Cafe CDD420 Serie Manual Del Propietário página 21

Care and Cleaning
Cleaning the Spray Arm
1
Unplug the dishwasher or turn it off at the power
supply.
2
Unclip the glass supports (if fitted) from the rack wires
and fold up all the foldaway stem safe shelves, so that
they are all upright and close to the top.
3
Remove the base rack carefully. Lift from the back first
to prevent knocking the detergent and rinse aid
dispenser.
4
Lift the spray arm and shake any foreign material out.
Rinse it clean under running water and wipe with a
damp cloth.
5
Replace the spray arm back onto the impeller.
Check that the spray arm is firmly seated and turns
freely.
6
Replace the base rack, lowering its front edge into
position first.
7
Plug the dishwasher back in or turn it on at the power
supply.
NOTE: If there is broken crockery or glass in the drawer,
it must be carefully removed to prevent damage to the
dishwasher.
20
Spray
Arm
Impeller
When refitting
the base rack,
ensure the outer
edges of the
rack sit on all
the rests within
the inside of the
drawer
49-4000255 Rev 0