Kathrein UFO DVB-S2-QAM Manual De Instrucciones página 16

1.3 Selecting input frequency
The input frequency in the active channel unit is selected using the "<" and ">" buttons. The input frequency can be set continuously
from 950 MHz to 2150 MHz in 1 MHz steps using the "+" and "-" buttons.
O1 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
The setting can also be made on a digit-by-digit basis:
• Press the "Change setting mode" button
• The fi rst digit fl ashes and can be input directly using the buttons on the keyboard
• After the fi rst digit has been input, the second fl ashes, and so on
• To make a correction, press the "Back" button to skip one place to the left
• After the last digit has been set, press the "Change setting mode" button
Always select the input frequency fi rst and then the output level.
Note:
The current SNR and the automatically detected operating mode, DVB-S or DVB-S2 of the front end are displayed in the input
frequency sub-menu.
Pressing the "Sub-menu" button
O1 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
** UFO 378TP-O1
SNR 15.2dB
BER
0.0E-00
Standard DVB-S
Sub-menu for "Input frequency" (signal available)
The displays of SNR, BER and DVB operating modes are valid only in regular operation with the front end clicked into place.
For the SNR, BER and DVB standard display all the parameters must be set and the indicator (*) may not be
Note:
fl ashing. Trouble-free operation of the systems requires: SNR > 12 dB
All manuals and user guides at all-guides.com
TP
3/4 QPSK
306.00 MHz
256 QAM
(starts mode)
displays the sub-menu and pressing the sub-menu button again exits it.
TP
3/4 QPSK
306.00 MHz
256 QAM
**
5 / 11
O1 MHz
1236
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu (example for digit-by-digit setting)
to end the mode
** UFO 378TP-O1
SNR --.-dB
BER -.-E---
Standard
-----
Sub-menu for "Input frequency" (no signal)
TP
9/10 QPSK
306.00 MHz
256 QAM
**