Kathrein UFO DVB-S2-QAM Manual De Instrucciones página 17

1.4 Selecting the input symbol rate
O1 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
The input symbol rate is selected using the "<" and ">" buttons.
Using the "+" and "-" buttons the input symbol rate can be set continuously in steps of 0.1 MS/s:
DVB-S1 QPSK from 2.0 MS/s
DVB-S2 QPSK from 1.0 MS/s
DVB-S2 8PSK from 1.0 MS/s
The digits can also be entered individually to a resolution of 0.001 MS/s:
• Press the "Change setting mode" button
• The fi rst digit fl ashes and can be input directly using the buttons on the keyboard
• After the fi rst digit has been input, the second fl ashes, and so on
• To make a correction, press the "Back" button to skip one place to the left
• After the last digit has been set, press the "Change setting mode" button
The code rate (e.g. 3/4) is automatically determined once the channel unit has locked on to the set transponder.
Note:
If an exclamation mark "!" is displayed for the output symbol rate, the output symbol rate or QAM stage must be
changed to ensure proper operation of the unit.
1.5 Selecting output channel or output frequency
The output channel unit is selected using the "<" and ">" buttons. You can use the "+" and "-" buttons to adjust the channel from
48 to 96 MHz and 114 to 858 MHz in 8 MHz increments.
O1 1568 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
In the Output channel sub-menu the output frequency can be fi ne-tuned in steps of 250 kHz in the ranges 47 to 97 MHz and
113 to 862 MHz. Pressing the "Sub-menu"
1.6 Selecting the output level
The output level is selected using the "<" and ">" buttons.
O1 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
The output level can be adjusted in 40 steps from level maximum ("0") to minimum ("-40") using the output channel sub-menu.
Pressing the "Sub-menu" button displays the sub-menu and pressing the sub-menu button again exits it. The output level is
selected using the "<" and ">" buttons and adjusted using the "+" and "-" buttons.
All manuals and user guides at all-guides.com
3/4 QPSK
306.00 MHz
256 QAM
to 45 MS/s
to 34 MS/s
to 28.9 MS/s
(starts mode)
TP
3/4 QPSK
306.00 MHz
256 QAM
button displays the sub-menu and pressing the sub-menu button again exits it.
TP
3/4 QPSK
306.00 MHz
256 QAM
6 / 11
O1 1236 MHz
27.400 MS/s
Outp. S21
6.900 MS/s
Main menu (example for digit-by-digit setting)
to end the mode
** UFO 378TP-O1
Frequency 306.25
Level 0
Output On
"Output frequency" sub-menu
** UFO 378TP-O1
Frequency 306.00
Level 0
Output On
"Output frequency" sub-menu
3/4 QPSK
306.00 MHz
256 QAM
**
MHz
**
MHz