Kathrein UFO DVB-S2-QAM Manual De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Menus are available for editing the TSID and the ONID. The values can be modifi ed by selecting the corresponding "orig" entry
using the "<" or ">" buttons and setting them to the "edit" value by using the "+" or "-" buttons. The current values of the TSID
and ONID from the processed transport stream are displayed in hexadecimal notation. In the "edit" setting you can modify the
values of the corresponding IDs. To do this, select the value using the ">" button. Use the "+" or "-" button to change the current
value in ± 1 increments. Alternatively you can also select numeric setting mode by pressing the
each digit can be modifi ed by pressing the "+" or "-" buttons in ± 1 increments. All IDs should be entered in hexadecimal format.
Possible values are "00h" to "FFh" for the OID and "0000h" to "FFFFh" for the TSID and the ONID.
Only experienced users should modify the TSID or ONID. If several channels (services) of a SAT transport stream
Note:
are distributed to multiple QAM transport streams, it is possible that the receiver cannot automatically detect all
channels because in this case the uniqueness of the TSID / ONID pair is lost. In this case please proceed as follows:
• Preferably the ONID should be modifi ed. If possible, set it to a value between FF00h and FFEEh. This range is reserved
for private use and is not used by public network operators.
• If the channel search is unsuccessful despite the ONID adjustment, the TSID can be modifi ed. Please ensure that all
TSIDs in a system are adjusted to guarantee uniqueness for each transport stream.
This sub-menu can be exited only when the cursor is on the "OID" parameter. To do this, use the "<" and ">" buttons to select "OID" and
press the "Sub-menu" button
2
Note
Note:
• A description of extended functions such as "Cable NIT compilation", "Logical Channel Number" assignment, etc. can be found in
the user instructions for the control elements UFG 300 and USW 30 that are required for implementing these functions.
Electronic equipment is not household waste; it must be disposed of properly in accordance with directive 2002/96/EC
OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27
equipment.
At the end of its service life, take this unit for disposal to an appropriate offi cial collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax +49 8031 184-306
All manuals and user guides at all-guides.com
to return to the main menu.
th
January 2003 on used electrical and electronic
936.4218/-/ZWT/0911/e - Technical data subject to change.
button. In numeric mode

Publicidad

Tabla de contenido
loading

Tabla de contenido