Publicidad
Idiomas disponibles
Idiomas disponibles
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
•
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. The warranty will not cover damage
•
caused by user modifications to the device.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
•
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
The warranty does not cover damage caused by disregard of certain guidelines in this manual and
•
the dealer will not accept responsibility for any ensuing defects or problems.
The warranty does not cover mechanical wear and LED failure.
•
A qualified technician shall install and service this device.
•
Do not switch on the device immediately after it has been exposed to changes in temperature.
•
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc. Only use the device
•
indoors with an alternating current of 230 VAC, 50 Hz.
Do not use lighting effects continuously: regular operation breaks will prolong their lives.
•
There may be a particular smell when the device is activated for the first time. This is normal and
•
any smell will gradually disappear.
Keep this manual for future reference.
•
4.
Features
RGBW colour mixing, manually or via DMX
•
DMX control:
•
55channel mode: RGBW
•
95channel mode: RGBW, dimmer, shutter, macro's, fading
•
stand5alone, master5slave or sound control via built5in microphone
•
with electronic dimming from 05100%
•
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
bracket
2
fuse
3
power input
4
DMX input
6.
Installation
Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket.
Connect the power cord to the mains. Disconnect after use.
Mounting the Device
Have the device installed by a qualified person, respecting EN 6059852517 and all other applicable
•
norms.
The carrying construction must be able to support 10 times the weight of the device for 1 hour
•
without deforming.
V. 02 – 09/03/2015
VDPLP608RGBW
5
DMX output
6
control buttons
7
display
4
©Velleman nv
Publicidad
