Kohler K-702101 Guia De Instalacion página 11

Install the Outside Panel (cont.)
Roll the panel back and forth along the track to make sure it operates smoothly.
Carefully remove the caution tape and protective strip from both door panels.
Align the panel with the showerhead side wall jamb next to the inside panel.
If the panel does not operate smoothly, adjustment may be needed. If adjustment is needed, remove
the panel.
NOTE: Moving the rollers to the top hole of the hanger brackets will cause the glass to hang lower.
Moving the rollers to the bottom hole of the hanging brackets will cause the glass to hang higher.
Loosen the roller screw(s) and move the roller to another hole in the hanging bracket. Insert and
tighten the screw(s) and rehang the panel.
Kohler Co.
All manuals and user guides at all-guides.com
11 1054858-2-A