Connectivity/Wi-Fi - NuWave PRO 20902 Manual Del Propietário

CONNECTIVITY
Wifi and Bluetooth
With the NuWave Connect App, you can operate your NuWave
Pro Smart Oven with your Smart Device.
Downloading the NuWave Connect App
Using the built-in QR reader in your Camera App:
1. Scan the QR code below. It will take you
to the App's download page on either the
Google Play Store or the Apple AppStore.
2. Follow the download and installation
instructions.
If your phone does not have that capability built-in, simply download
a 3rd-Party QR Scanning App before scanning the NuWave QR
Codes and you are ready to go.
1. Open your mobile app store (App Store, Google Play).
2. Search for "QR code readers."
3. Simply download the QR code reader to your phone, open it,
scan the code, and you are ready to go.
WI-FI Set-Up and Activation
1. Download and install the NuWave Connect App.
2. Make sure your phone is connected to your home Wi-Fi 2.4GHz
network. Open the app and follow the in-app instructions for the
verification process. Once verification is complete, begin adding
devices. To add a device, tap "+" then select "Pro Smart Oven."
• While the Pro Smart Oven is in standby mode, push and
hold WiFi for 1 second. This will activate or deactivate the
built-in Wi-Fi.
• The Wi-Fi icon in the screen will indicate the status of the
Pro Smart Oven's Wi-Fi connection. Make sure the Pro
Smart Oven Wi-Fi is active and connected with your Wi-Fi
2.4GHz network.
During first-time setup, the Wi-Fi icon will blink rapidly
°
while pairing with the network.
When the Wi-Fi is connected, the icon will light up and
°
remain lit.
When the Wi-Fi is disconnected, the icon will be off.
°
• If the connection process fails, the Wi-Fi light will turn off.
12
connectivity