NuWave PRO 20902 Manual Del Propietário página 30

INSTRUCTIONS
Using Preheat
1. If the Preheat function does not automatically come on, press
Preheat before cooking.
2. Set the cooking temperature and time.
3. Press START/PAUSE and the Pro Smart Oven will begin pre-
heating to the set cooking temperature.
• "Preheat" will flash while the Pro Smart Oven is preheating.
• When the Pro Smart Oven reaches the set cooking
temperature, it will go into a 10-second hold to allow you to
put in your food, after which the Pro Smart Oven will begin
cooking.
During the hold, the Pro Smart oven will beep twice, the

screen will show a 10-second countdown and "Ready",
and then, when the countdown finishes, the Pro Smart
Oven will beep once.
• When the Pro Smart Oven has finished cooking, the screen
will show "END" and the Pro Smart Oven will beep three (3)
times.
Automatic Preheat
The default Preheat setting for the Pro Smart Oven is ON for those
functions and Menu Presets that have Preheat, and OFF for those
that do not.
1. Press Menu + Preheat at the same time to turn off the Automatic
Preheat function. The Pro Smart Oven will beep twice.
2. Press Menu + Preheat at the same time again to turn on the
Automatic Preheat function. The Pro Smart Oven will beep twice.
3. If Automatic Preheat is engaged, press Preheat to cancel it.
• If the Pro Smart Oven is turned off and unplugged, it will
retain the last Preheat setting used when it is plugged back in
and turned on again.
• Pressing Preheat will add or remove Preheat.
Using the Digital Temperature Probe
The Pro Smart Oven's digital Probe lets you cook according to
the internal temperature of the food. The default Probe target
temperature is 165F with a setting range between of 50F~212F,
which is adjustable in 1F increments, or it can be turned off. The
Pro Smart Oven will cook until the Probe target temperature is
reached, even if the cooking time ends first.
30
instructions