The following washing, rinsing and sanitizing solutions, or their
equivalents, may be used:
SOLUTION PRODUCT
Washing
*Ajax
Cleaner Powder
Rinsing
Plain Water
Sanitizing
**Clorox
Institutional
To clean and sanitize the motor base
Clean and sanitize the motor base prior to initial use and after
each use. Unplug the unit, then wipe down the exterior surfaces
of the motor base with a cloth or sponge dampened with a soluble
detergent. Next, wipe down with rinse water. Prevent liquid from
running into the motor base by wringing out all excess moisture from
cloth or sponge before using it.
NEVER IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER
LIQUIDS.
Allow the unit to air-dry before using again.
Never use harsh, abrasive-type cleaners on any part of the
commercial food processor.
Any other servicing should be performed by an authorized service
representative.
For Waring
products sold outside of the U.S. and Canada, the
®
warranty is the responsibility of the local importer or distributor. This
warranty may vary according to local regulations.
WARNING: Any expressed or implied warranty on this product is
void if appliance is used on Direct Current (DC).
Sanitizer
®
®
WARRANTY
DILUTION
IN WATER
¼ oz. per 2½
gallons
1 tablespoon
per gallon
22
TEMPERATURE
Hot 115°F (46°C)
Warm 95°F (35°C)
Cold 50°F
(10°C–21°C)