Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Fig. 13
9. The refrigerator is now fully installed into
the enclosure. (Fig. 14)
Fig. 14
11
All manuals and user guides at all-guides.com
Electrical Connection
WARNING
The rear of the refrigerator cooling system
has hot surfaces and sharp surfaces that
can damage electrical wiring. Make sure
there is a good clearance between all
electrical wiring and the cooling system of
the refrigerator.
Position any electrical wiring within the
refrigerator enclosure opposite the burner
side of the refrigerator. Do not put any
electrical wiring through the roof exhaust
vent. Failure to correctly position electrical
wiring can result in electrical shock or fi re.
The refrigerator operates on the following
energy sources:
115-volt AC - (132 volts maximum - 108 volts
minimum)
NOTE: If a DC power source is to be
connected, please use a genuine Furrion
designed/authorized power inverter to
change the 12V DC power to AC 115V/60Hz.
Operation out of these limits can damage the
refrigerator electrical components and will
void the warranty.
Wiring Diagram
Publicidad
Solución de problemas
