Before Using
Interior LED light:
The interior light is at the top of the fresh
food compartment. It comes on when the
refrigerator is ON and the door is open.
Ice-tray:
The ice-tray is designed to allow you to
make ice that will cool a hot drink or chill a
beverage.
Product Ice Cubes:
Filling the ice-tray with cold water, then place
into a freezer until the freezer freezes into
ice.
Removing Ice Cubes:
Turn upside down the ice-tray and twist
slightly to remove the ice cubes or pour some
cool water on the bottom of the tray.
Before Using for the First Time
● Remove all adhesive tape and packaging
from the interior of the refrigerator.
● Remove the transport protection pieces
and pull off the adhesive tape.
● Wash the inside of the refrigerator with
lukewarm water with a little bicarbonate
of soda added (5 ml to 0.5 liter of water).
Do not use soap or detergent as the smell
may linger. Dry the appliance thoroughly.
● The refrigerator may be installed with its
rear panel directly against the cabinet.
The minimum air gap must be 50mm
minimum.
● For good circulation, the vent at the top
and bottom of the refrigerator must not
be blocked. Your refrigerator should be
placed on flat and firm surface for quieter
operation.
● Do not expose the refrigerator to direct
sunlight or a heat source such as ovens,
radiators, heaters, etc.
● Do not under any circumstances place
heated beverages in your refrigerator.
● Do not open the door more often than
7
All manuals and user guides at all-guides.com
necessary to lessen the escape of cold air.
● For better air circulation, do not overfill
the unit.
● Adjust the temperature regulator
according to the amount of product and
the ambient temperature.
● Turning it to maximum will cause it to
run continuously and ice up. Avoid the
maximum setting.