Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
The refrigerator operates on a 115V AC/60Hz
energy source. Operation out of these limits
can damage the refrigerator electrical
components and will void the warranty.
Turn On/Off the Refrigerator
Before connecting the refrigerator to the
mains and putting into operation for the first
time, leave the refrigerator to stand for 30
minutes to allow the refrigerant to flow into
the compressor. Otherwise the compressor
may be damaged.
NOTE: If the refrigerator is unplugged or
power lost, you must wait at least 7 minutes
before restarting.
To Switch On:
Plug the refrigerator into the power socket
and the refrigerator will be turned on
automatically.
To Switch Off:
Unplug the refrigerator from the power
socket.
Thermostat Control
WARNING
● Do not set the temperature too low, the
"3" setting should be considered cold
enough as a storage temperature.
● After the refrigerator has been
unplugged, leave for 7 minutes
minimum before plugging it in again.
The thermostat control knob for is located on
top of storage compartment.
All manuals and user guides at all-guides.com
The first time you turn on your refrigerator,
rotate the thermostat control knob to the
"3" position and leave enough time for your
refrigerator to cool down completely before
loading stuffs.
The thermostat control knob has five
settings. "1" is the warmest. "5" is the
coldest. The "3" level should be the most
appropriated setting for office or RV
refrigerator use.
12
Publicidad
Solución de problemas
