General Safety Instructions; Safety Instructions For Handling Battery-Powered Tools - Bona OptiSpread UX Manual De Funcionamiento

4.2. General safety instructions

Observe general safety and accident prevention regulations! In addition to the
instructions in this operating manual, the general safety and accident preven-
tion regulations of the legislator must be observed. Keep your workspace tidy!
Disorder in the work area can result in accidents.
Pass on the instructions manual to third parties. Ensure that third parties only use this device
after receiving the necessary instructions.
Always handle and operate your Bona OptiSpread UX with care.
The Bona OptiSpread UX must only be used by skilled personnel or explicitly trained
persons, otherwise serious operating errors and injuries may occur.
Keep children away and secure against unauthorised use. Never leave the unit
unattended when it is ready for use or in operation. Do not allow children near it under any
circumstances. Children are not allowed to use this product. Secure the product against
unauthorised use.
Check for damage. Check the device for any damage before putting it into operation. If the
device has any defects, it must not be put into operation under any circumstances.
Do not use sharp objects. Never insert pointed and/or metallic objects inside the device.
Fill Bona OptiSpread UX only with Bona silane adhesive in a 9 kg foil bag. No non-system
adhesive systems may be processed with the machine. This leads to the exclusion of
any warranty claims. Also make sure that the adhesives correspond to approx. room
temperature. Cold adhesives are tougher, which leads to higher battery consumption and
strain on the feed. Therefore, always acclimatise the adhesive sufficiently before processing.
CAUTION! Store the Bona OptiSpread UX in the holder provided when not in use. To do
this, choose a place where it is not a trip or fall hazard.
Only use the Bona OptiSpread UX with the nozzle screwed on and secured!
Make sure that your hands do not get into the area of the piston or the feed device to avoid
injuries. Never use grease or other lubricants such as fats or oils for the working piston!
Only use original accessories! Do not carry out repairs yourself, but contact your Bona
system technician or our Service Hotline.
8
Operating manual
Do not misuse: The machine is only designed for the application of Bona parquet adhesives
from foil bags!
When folding the folding stand out of the parking position, be careful not to crush fingers
and hands! Wear appropriate clothing. Do not wear loose clothing or jewellery. Tie up long
hair. Keep hair, clothing and gloves away from
moving parts. Loose clothing, jewellery and long hair can get caught in moving parts.
Apply the adhesive only to the desired working areas! Avoid contact with sensitive surfaces
and those ready for use.

4.3. Safety instructions for handling battery-powered tools

Keep your power tools safe! Unused power tools and battery packs should be stored in a
dry elevated or locked place, out of the reach of children.
Regularly check the plug and cable of the power tool and have it replaced by a recognised
specialist if damaged. Check extension cables regularly and replace if damaged. Keep
handle dry and free from oil and grease.
Have your power tool repaired by a qualified electrician! This power tool complies with the
relevant safety regulations. Repairs may only be carried out by a qualified electrician using
original spare parts, otherwise accidents may occur for the user.
Only charge the battery with the charger provided. Make sure that the power supply is
suitable for the charger supplied. Also ensure that the battery is correctly aligned and
inserted into the charger as instructed. Do not attempt to open batteries or the charger.
They do not contain any repairable parts.
Do NOT expose power tools to rain or moisture. Water entering a power
tool increases the risk of electric shock.
EN
Operating manual
9