Team kalorik TKG RVC 1004 AB PB Manual De Instrucciones página 10

HOME CLEANING
Auto cleaning
• At the start of a cleaning cycle,
the robot will map out the zone.
• During the cleaning cycle, the
robot touches the edges of the
room, as well as chair legs and
other furniture.
• The unit continues this process
until it has cleaned up the entire
zone.
• If its battery gets low before
finishing a cycle, the robot
automatically returns to the
charging dock.
• Once the robot finishes its
cleaning cycle, it also returns to
the charging dock to recharge.
FLOOR MOPPING CLEANING
The robot is equipped with a water
tank that enables the robot to mop
floors.
1. Attach the cloth and fill the tank
with water.
2. Remove the dust bin.
3. Put the water tank back in place
and start the robot.
Tip : you can also use the mopping as
a dry polishing function.
When finished, empty the water tank,
rinse it with clean water and store it
dry or it may become cloggy and
smelly. Check that the 4 water
drainage holes are not blocked,
unblock them if necessary with a small
needle.
TKG RVC 1004 AB PB 10