Team kalorik TKG RVC 1004 AB PB Manual De Instrucciones página 14

Cleaning the robot's rolling brush, side brush, swivel wheel and sensors
1. Take out the rolling brush, clean the
vacuuming channel with a cloth.
2. Clean the rolling brush: If any hair or
threads or yarn got stuck, simply cut
them using the cleaning tool knife
that has been provided with your
robot. Then remove everything
carefully. Only if the central brush
can rotate freely, your robot can
work to your satisfaction.
3. Remove the side brush, use a cloth
to remove the dust from the brush.
4. Pull out the swivel wheel, then clean
the swivel wheel with the cleaning
tool.
5. Dust off the cliff sensors to maintain
the best performance.
TKG RVC 1004 AB PB 14