Spot Cleaning; Edge Cleaning - Team kalorik TKG RVC 1004 AB PB Manual De Instrucciones

SPOT CLEANING

When you select spot cleaning, the
robot cleans a defined area by
spiraling outward about 3 feet(1
meter) in diameter and inward.
When you use this mode, the robot
boosts its vacuum power to provide
the best cleaning possible.
To start, place your robot on top of
the spot to clean and press (spot) on
the remote control.
MAX VACUUMING CLEANING
The robot increases its suction power
to provide a deeper cleaning process
when you press the button on the
remote control, max vacuuming
cleaning if off by default. Please be
aware that this extra boost of power
will consume more energy and that
the robot will have to return to the
base for charging more often.

EDGE CLEANING

After the robot finishes cleaning the
open areas of your floor, it uses the
‚edge clean' mode to ensure that it
will clean along walls and around
furniture legs, if you prefer to pass
faster to this mode, press the button
on remote control.
SINGLE ROOM CLEANING
When a specific room needs to be
cleaned, please press the 'single
room' button on your remote control.
Note: the robot will clean and then
stop after 30 minutes in this mode.
Make sure to confine the robot to a
room by closing the door.
11 TKG RVC 1004 AB PB