Firmware Update - wow! LOOQER Traducción Del Manual Original

3.5 Firmware update
Once the connection settings have been saved, the firmware can be downloaded to the device. In order to download
the firmware, it is essential to establish an internet connection!
As mentioned above, data security is a top priority in communication. On one hand, this applies to communication bet-
ween the device and a vehicle, and on the other hand, also to the operating system of the device – the firmware.
And as the firmware contains the know-how of the diagnostic database, this makes it particularly important to protect the
data. That is why the firmware is not stored locally on the computer, but provided individually for each device via an online
service. Please ensure that the computer on which you are running the WOW! software "LOOQIT" is connected to the
internet.
Connect the device with the computer using the USB-C cable!
31
1
1. Once the device is connected with the computer via the
USB-C cable, start the process by pressing the Repla-
ce firmware button
2. The firmware is saved to the device and where appli-
cable, replaces any already existing, older version
3. Depending on the data rate of your internet connection,
the process takes between 1 and 3 minutes. Do not
disconnect the device from the computer or use other
programs during this time. While the firmware is loa-
ding, the LED light ring of the device flashes red. Once
loading of the firmware has been completed, the colour
of the LED light ring changes to white or blue (depen-
ding on the power supply) and the software confirms
that the process was successful.
1