Step-By-Step Operation; How To Take A Test; Test Results - Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario

Smart Start, Inc.
S.M.A.R.T. Mobile device will automatically wake up when a test
window opens and keep track of the countdown timer. The display
will turn on when the device is awakened.

Step-By-Step Operation

How to Take a Test

Plug in your IN-HOM S.M.A.R.T. Mobile device and press the "*",
"0" or "#" key to wake up and initialize the device. Once ready, the
display will show "Ready." If the device is in an open test window,
the display will show "Test Required – Please Blow." At this
time, drink water to ensure a clean mouth.
Take a deep breath and blow steadily into the mouthpiece until the
unit stops beeping and you hear a click. You do not have to blow
hard – just steady. During the test, the display will show the
word "Testing – Keep Blowing".
approximately 4 seconds.

Test Results

After testing, the display will show "Analyzing – Please Wait".
This means the unit is processing the breath sample and a result
will be displayed. F o r a c om p l e t e t es t , t here are five (5)
possible t e s t results:
1) "Passed" means the test is complete and the alcohol content
of the sample passed.
2) "Warning" means the test is complete and the device
measured some level of alcohol – but, not enough to
cause a failure. You will not be required to take additional
tests. If you are assigned to a zero-tolerance program, this
test will still be reported.
3) "FAILED" means the test is complete and the alcohol content
of the sample is considered a failed test. You will be required
to take additional tests to provide a passing test. See display
message summary below for more information on a failed test.
4) "VIOLATION" means the test is complete and the alcohol
content is considered a violation. You will be required to take
additional tests to provide a passing test.
IN-HOM S.M.A.R.T. Mobile User's Manual
― 13 ―
The total blow test time is
See display