Troubleshooting - Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario

Smart Start, Inc.
Q: How do I know if the device is charging?
A: Plug in the charger and charger cord to the device. Once the
device has enough charge to initialize and turn on, you will see the
battery icon at the top. There will be a small "lightning bolt" icon to the
right of the battery icon when the device is charging.
Q: How can I check to see if my test was recorded?
A: Select the MENU (left "Select" key) and use the middle up/down
keys to scroll down to "Test History." Press the left "Select" key to
open the test history. You can find the last 30 tests. Press right
"Select" key to exit.
How do I find the best cell signal in my house?
Q:
A: Make sure the device is charged well. Use the MENU Cell
Information to check actual signal strength and then, move the
device around in your house to find the best signal strength

Troubleshooting

Unit won't turn on:

Plug in the charge to an electrical outlet and plug in the cable to
the charger connection on the front of the device

If the battery is completely dead, it may take a few minutes to
charge enough to initialize the device (much like a cell phone)

If the device was left in your car overnight in the winter, the device
may be too cold to charge. Allow the device to warm up above 32°
F / 0° C. At this point, the device will begin charging the battery.

If the battery has been removed, the unit will not turn on.
Removing the battery is considered tampering and will be reported
as a violation of your program.
Device Error messages

If you see "Device Error 1" this indicates there has been a failure in
IN-HOM S.M.A.R.T. Mobile User's Manual
― 18 ―