Charging Your Unit - Smart Start IN-HOM S.M.A.R.T. Mobile Manual De Usuario

IN-HOM S.M.A.R.T. Mobile User's Manual
Smart Start, Inc.
Figure 2
Insert charging cord here Insert mouthpiece as shown
NOTE: The mouthpiece must be installed as shown here. The
device will not accept a test if the mouthpiece is installed
incorrectly. You are responsible for any missed tests due to the
mouthpiece being installed incorrectly.

Charging your unit

Your IN-HOM S.M.A.R.T. Mobile device is equipped with a battery
that enables it to run without being plugged in to A/C power.
Smart Start highly recommends that you keep your IN-HOM
S.M.A.R.T. Mobile device plugged in at all times; except when
transporting it. Much like a cell phone, if the battery in your unit is
completely dead, it may take a few minutes to charge the unit
enough to initialize the device. The battery will not charge below
32° F (0° C). If your unit was left in in your car overnight in the
winter, the device may need to warm up before it will charge the
battery. It is your responsibility to keep the device in normal
operating temperatures 50° F to 100°F (10°C to 38°C). Any
skipped tests due to a dead battery will be reported. The battery
charge level is indicated by the battery icon on the display (see
figure 3 below). It is your responsibility to keep the battery fully
charged. When the charger is connected and the device is
charging, you will see the battery icon with the charge indicator
(see figure 3 below).
Figure 3
Battery icon shown here on top of display
Battery icon when charging
― 9 ―