Coverings - Removal And; Important - Permobil M2 Manual De Instrucciones

Comfort Cushions - M2, ACTA-EMBRACE, Curve Operation Manual
COVERINGS - REMOVAL AND PLACEMENT
Note About Coverings: The STRETCH-AIR or COMFORT-TEK Cover are provided
to protect the cushion. The Incontinence Liner is available as an accessory.
WARNINGS:
- Risk of falling: The bottom of the Incontinence Liner is slippery; DO NOT
use the Incontinence Liner without a cover.
- The cover and the Incontinence Liner MUST be correctly oriented on the
cushion, as shown below.
Covering Removal: Open the zippers of the cover (and the Incontinence
Liner, if using). Remove the covering(s) from the cushion.
Covering Placement: Open zippers. Insert the cushion into the
Incontinence Liner first, if using, and then place into the cover. Close the
zippers. Refer to the images below for correct orientation.
IMPORTANT: If using the Incontinence Liner, place the cushion into the
Incontinence Liner first, before installing the cover.
The cushion is
contoured in Front
and on Top.
Back
Zipper in
Back.
6
All coverings are
contoured in Front
.
and on Top