Permobil BodiLink Lateral Trunk Supports Operación Manual página 12

INSTALLATION - CANE MOUNT
Installing GT2 cane mount hardware. All required tools are provided.
1
Remove the bolts (A), the safety washers (C), and the
double washer (D) from the cane clamp (B) to release.
2
Making sure that the bolts (E) are oriented up, line up
the two halves of the cane clamp (B) around the chair
cane. Fasten with the bolts (A), the safety washers (C),
and the double washer (D).
3
Secure the cane clamp with the lock screw (F) using
the 3mm hex key.
4
Continue to the "Adjustment and Use" section for the
final hardware adjustments and the pad positioning.
BodiLink Lateral Trunk Support Operation Manual
D
A
10
B
A
Swing-Away GT2 Hardware
B
C
F
E