Contents
1.
Applicable to. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.
2.1
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2
2.3
Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.4
2.5
3.
Safe handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.
4.1
Scope of supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.2
4.3
5.
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.
6.1
System set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.2
Function checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.3
Safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.3.1
7.
7.1
7.2
7.3
7.4
7.5
7.5.1
procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7.6
7.7
7.7.1
7.7.2
7.8
7.9
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.10
7.11
7.12
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.
10.
Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
11.
12.
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
12.1
12.2
12.3
Operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
12.4
13.
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
14.
1.
Applicable to
►
For item-specific instructions for use and information on material
compatibility,
see
https://extranet.bbraun.com
2.
General information
2.1
Intended use
Task/Function
The reciprocating saw GA334, combined with the relevant tool and with
corresponding support foot as required, is used for processing hard tissue,
cartilage and the like, as well as for bone replacement materials.
Application Environment
The product fulfills the requirements for type BF pursuant to
IEC/DIN EN 60601-1 and is used in operating rooms in sterile environ-
ments of explosion risk areas (such as areas with pure oxygen or anesthe-
sia gases).
also
the
Aesculap
Extranet
at
3