Lotus SmarTime 50047 Manual De Usuario página 11

2.17.5 Password
Use password to secure your device content.
Enable Password switch. Select a 4-digit pin.
Now you need to enter the password to be
able to use any function. You can also change
the pin.
2.17.6 Factory reset
When selecting Factory reset, all collected
data in the watch will be deleted.
2.17.7 Bluetooth phone
Tap Telephone icon to turn on/off the Blue-
tooth calling. To enable you need to pair the
Watch Audio Bluetooth displayed in watch.
When Bluetooth calling is enabled, you can
use the watch to answer/hang up the phone..
3. Connect
to the APP
3.1. Download and install the
Lotus SmarTime app.
Scan the following QR CODE to download
and install the app.
• Android Google play search" LOTUS Smar-
Time" to install
• iOS: Apple store search" LOTUS SmarTime"
to install
3.2 Connect watch
Bluetooth is activated and visible once the
watch power on. Open the APP, enter Device
and Connect device. The APP starts scan-
ning for the device. When visible, select "Lo-
tus S15" and go to pair.
The time on watch will be synced with mobile
when connected to app.
3.2.1 Bluetooth Connected:
3.2.2 Bluetooth Disconnect:
2.3 Connect Audio Bluetooth
In About , find the Bluetooth name and
then go the Bluetooth settings of the phone
and connect. Once connected, slide right
from Dial. In the shortcut menu, tap the icon
to enable or disable the Audio Bluetooth.
3.4 Disconnect watch
Disconnect the watch in the app; Device/Dis-
connect watch. Disconnect Audio Bluetooth
by using Shortcut in watch and tap the tele-
phone icon.
iPhone users need to take Forget device in
Bluetooth menu in mobile as well.
Please note you have to be connected to
have the data synchronized and saved in the
app.
3.5 Find device
If connected, tap Find Watch in app to local-
ize the watch. The watch display lights up and
vibrate. Confirm found watch by pressing the
button.
3.6 Camera
Tap Take a photo in the app to activate re-
mote camera in the watch. Tap the Camera
icon on the watch take a photo. Pictures will
be saved in the phone gallery automatically.
3.6 Synchronization
Connect the watch with the app. It will sync
the watch data to the app automatically.
3.7 Tilt to wake
When enabling Tilt to wake in app, the watch
will light up by you tilting your wrist.
3.8 Reminder mode
In Device/More/Reminder mode you set the
way you want to be notified. Only by display
or vibration or both.
3.9 Do not disturb mode
If you wish to not be disturbed by watch for
any notifications, you enable the DND mode.
You can also set for a certain period or any
time. After entering your settings in App/De-
vice/More/Do not disturb you press save to
activate.
3.10 Alarm
Set the alarm in App/Device/More/Alarm. Af-
ter setting and saving the alarm in the app
the watch will be synced.
11 11