Accessories; Guide Bar And Saw Chain Combinations - Husqvarna 420 EL Manual De Usuario

17
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
18
Sound levels
Equivalent sound pressure level at the operator's ear, dB(A)
19
Vibration levels
2
Front handle m/s
2
Rear handle m/s
Equivalent vibration levels
2
Front handle m/s
2
Rear handle m/s
Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed, m/s

Guide bar and saw chain combinations

The cutting attachments below are approved for the
model 420 EL
Guide bar
Length, cm (in) Pitch, mm (in)
40 (16) 9,52 (3/8)
17
Noise emissions in the environment measured as sound power (L
2000/14/EC.
18
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
19
Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical disper-
sion (standard deviation) of 1 m/s
with a bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration
level may vary by max ± 1.5 m/s
20
Equivalent vibration level is measured and calculated as for combustion engine powered chainsaws. These
figures are quoted to be able to compare vibration data regardless of type of engine according to ISO
22867:2011.
98
dB(A)
WA
20

Accessories

Gauge, mm (in)
1,3 (0,050)
2
. Declared vibration data from measurements when the machine is fitted
2
.
420 EL
101.9
103
90.8
5.2
3.9
2.2
2.4
16/40
14/35.5
Spur/6
14.5
Saw chain
Max. nose radius Type
7T Husqvarna H37
) in conformity with EC directive
WA
Drive link count
56
1782 - 003 - 04.04.2022