GB
IRL
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.
Scope of delivery
Tank [1] with pump [2], hose [3], instructions for use [4], spray wand [5], shut-off valve [6],
carrying strap [7], elbow [22], extension wand [23]. (Fig. 1)
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Gross weight max.
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Pressure change from 0 to 3 bar
Table 1
Assembly
1. Fasten the carrying strap [7] on the tank [1]. (Fig. 2)
2. Push the hose [3] into the fixture [9] and secure it with the cap nut. (Fig. 4)
3. Push the hose [3] onto the shut-off valve [6] and secure it with the cap nut. (Fig. 4)
4. Screw the spray wand [5] onto the shut-off valve [6]. (Fig. 4)
5. Screw the spray elbow [22] onto the spray wand [5]. (Fig. 4)
Checks
Visual inspection: Check that tank [1], pump [2], hose [3], shut-off valve [6], piston pres-
sure gauge [8] and spray wand [5] with elbow [22] are undamaged. (Fig. 1, 3 and 4)
+
Pay special attention to the connections between the tank – hose and the hose –
shut-off valve and to the condition of the pump threading and spray wand.
Pump up the empty device to 2 bar (Fig. 10).
No leaks:
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Pull up the piston pressure gauge [8]. (Fig. 3)
Function:
► The pressure must dissipate.
Activate the shut-off valve [6]. (Fig. 12)
► The shut-off valve must open and close.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
AUS
USA
PROFI 3275
2.5 kg (5.5 lbs)
7.5 kg (16.5 lbs)
15
NZ
CDN
5 l
8 l
3 bar (44 psi)
40 °C (104° F)
13.0 kg (28.6 lbs)
polyethylene
on the side
< 0.07 l
1 l/min
< 5 N
min. 5000 x
IND
PROFI 3270
10 l
12.5 l
3.0 kg (6.6 lbs)