Additional Instructions
UNPACKING
Carefully remove your Scout balance and each of its components from the package.
Store the packaging material to ensure safe storage and future transport.
Included Components:
Balance
User Guide &
Instructions
Warranty Card
AC Adapter & Plug
* Only available for certain regions.
CALIBRATION
When the balance is operated for the first time, a span calibration is
recommended to ensure accurate weighing results. With balance turned on:
Step-1
Press and hold Menu until [mMeNU] (Menu) is displayed.
Step-2
Release the button, the display will show [C.A.L].
Step-3
Press Yes to accept. [SpaN] will then be shown.
Step-4
Press Yes to begin the span calibration. Zero reading is stored
automatically.
Step-5
Place the specified span calibration mass on the pan. Then, press
Yes to accept the weight or No to select an alternate weight.
[--C--] will be displayed while the reading is stored
The display will show [done] if the calibration was successful. The
balance returns to the previous application mode and is ready for use.
OPERATION & APPLICATIONS
The balance can be configured to operate in various Application modes.
Press and hold Mode key to select your Application mode.
The Scout SKX balance incorporates the following Applications :
[wWeIGH]
Weighing
Ohaus Corporation www.ohaus.com
[SPEC.Gr]
Density
Determination
Scout
Pan
Stacking & Storage Cover (not applicable
for 1mg model)
Calibration Mass* (only for models up to
620g capacity)
[mMoLE]
Mole
Weighing
i
SKX Balances
Scout
SKX Balances