How To Remove The Battery Pack - Kokido VOLTERA 25 Manual De Usuario

Avoid touching the wires altogether and avoid allowing them to make

contact with any metal items, which could cause sparking and/or short
circuit the battery.
Never smoke or allow a spark or flame in the vicinity of the battery or the

pool vacuum.
Do not expose the battery to fire or intense heat as this may result in an

explosion.

CAUTION!
If a battery leak occurs, avoid contact with the leaking fluids and place the damaged
battery in a plastic bag.
- If leaking fluids come in contact with skin and clothing, wash immediately with plenty
of soap and water.
- If leaking fluids come in contact with eyes, immediately flush eyes with cool running
water for at least 15 minutes and do not rub them. Seek medical attention as soon as
possible.
How to remove the battery pack for battery disposal only (To be done by
authorized technician)
Recommended tools (not included): Philips screwdriver
1. Use Philips screwdriver to unfasten all screws on the body. Separate the
body halves to expose the main unit. Use screwdriver to unfasten the
screws on the front cover of the main unit. Remove the cover and
expose inside.
2. Use the screwdriver to unfasten the screw on the corner of the support
plate. Pull out the plate to expose all wire connectors. Detach the wire
connector at the corner as shown by pressing on its clip and pulling it
out.
17