Publicidad
Idiomas disponibles
Idiomas disponibles
en
Description and function
permanent magnet rotor and integrated differential pressure control. An electronic
control module with an integrated frequency converter is on the motor housing. Con-
trol mode and delivery head (differential pressure) are adjustable. The differential
pressure is controlled via the pump speed.
Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Display of selected characteristic curve or selected signal type
11. Signal cable connection
12. SSM cable connection
13. Mains connection: 3-pole plug connection
14. Wilo-Connectivity Interface
Status LED
The status LED (Fig. I, Item 8) provides a quick overview of the status of the pump:
ƒ
ƒ
HMI with operating button
Wilo-Para MAXO ... F01/F02:
The pump is equipped with indicator lights (LEDs) and an operating button (Fig. I,
Item 6).
Pictograms of the control mode (Fig. I, Item 9):
The pictograms show the selected control mode: For further details on control func-
tions, see section "Control and communication functions"
68
Pump housing with screwed connections
Glandless motor
Condensate drain openings (4x around circumference)
Housing screws
Control module
Operating button for pump adjustment
Rating plate
Status LED
Display of selected control mode
LED lights up green in normal operation.
LED lights up/flashes in case of a fault (see section "Faults, causes and remed-
ies").
External control (F02 only)
WILO SE 2022-04
Publicidad
