Aqara E1 Manual De Instrucciones página 16

Touch & hold for 10
seconds
Indicator Light Description
Indicator Light Status
Quick blinking of blue
light
Slow blinking of orange
light
Quick blinking of green
light
Green blinking
White blinking
Steady blinking of White
light
Buzzer Description
Buzzer Status
1 Long beep
2 Short beeps
3 Short beeps
Turn o the device
Description
The Curtain Driver is connecting with the hub
(A er the device is started for use for the first
time or reset).
Firmware updating is in progress.
Holding to the rail is in progress.
Releasing from the rail is in progress.
The device is being charged.
Charging is complete and the adapter is not
removed.
Description
Device opening range deleted.
Factory settings restored.
Device searching reaction.
Opening and closing directions switched.
Range limit point was set successfully.
When the range of Curtain Driver is not deleted,
set the limit point of stroke manually.
When the range of Curtain Driver stroke is
deleted, delete the range again.
The curtain driver is held in place.
The curtain driver is released in place.
Warning of low battery.
12