Installation Methods - Aqara E1 Manual De Instrucciones

Installation Methods

Installation Methods for Rods
Single-Sided Curtains (only one Curtain Driver is needed)
1.Force apart the standard Rod hanger, hang it between the first and
second rings (or grommets) on the movable side of the curtain, and
tighten the four legs of the hanger;
Hold the sides of the hanger
to lightly force it apart；
2.A er startup, quickly double tap "Setting button" to release the hook on
the curtain driver until it reaches its maximum length, and completely
close the curtain;
3.Hang the curtain driver on the hanger as shown in the figure below,
quickly double tap "Setting button" to hold the curtain driver onto the
rod. Then, the indicator will turn green and blink, and 3 short beeps will
sound from the buzzer when the product it is held in place.
The first ring
The hook reaches out to
the maximum length;
The hook is locked to
the innermost;
Pinch the ring hole until
a "click" is heard；
Opening direction of curtains
05
The second
ring