Product Introduction - Aqara E1 Manual De Instrucciones

Product Introduction

Curtain Driver E1 is a motorized device that can control your existing
curtains automatically, it is based on the Zigbee 3.0 wireless protocol and
can achieve scheduled control of curtains, and work with other smart
devices when connected to the Aqara Home app.
*An Aqara Zigbee 3.0 hub is required. Some functions require specific models of hubs.
Please consult www.aqara.com/support for more details.
Wheel
Hook
Light sensor
Warnings
1.WARNING: Important safety instructions. Follow all instructions since
incorrect installation can lead to severe injury. It is important for the
safety of persons to follow these instructions. Save these instructions.
2.WARNING: the driver should be disconnected from its power source
during cleaning, maintenance, and when replacing parts.
3.Frequently examine the installation for imbalance and signs of wear or
damage to cables springs and fixings. Do not use if repair or adjustment
is necessary.
4.Repairs must be performed by authorized personnel only or you will
void your warranty.
5.Do not operate when maintenance, such as window cleaning, is being
USB Type-C port
01
Indicator
Setting button
Click once: to open, close or stop the
curtain;
Click twice in succession：to
release, withdraw or stop the hook;
Click three times in succession: to
manually set the start or end
position of the curtain;
Touch & hold for 5 seconds: to turn
on the device or reset to factory
settings;
Touch & hold for 10 seconds: to turn
o the device.