Descargar Imprimir esta página

Mx Onda MX-HC2604 Manual De Instrucciones página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning inside the oven
Do not use metal scouring pads that may scratch the surfaces, use specific
cleaning products for ovens. For stubborn stains, wipe them after
preheating to 90 ° C for 30 seconds.
Some juices and grease stains, crumb tray / juices aluminum, which are
not cleaned with cleaning products. Use the enamel tray in order to prevent
juices and fats falling into crumb tray / juices.
For cleaning of resistance at the top and bottom of the oven, use a cloth
soaked in soapy water and make cleaning with longitudinal movements.
Steam cleaning
The steam cleaning system will facilitate the removal of persistent grease, as
well as solid residues adhering to the walls of the oven, the steam will soften
the grease and solid residues, making cleaning more comfortable and easy.
Follow the process below:
1. Remove all accessories from inside the oven.
2. Pour about half a liter of water into the enamel tray and place it at the
bottom of the oven.
3. Turn the temperature selector to the
4. Using the heating resistance and convection mode selector ( PR ), choose
position 2 heat at the bottom (
5. Turn the timer to the 30 minute position.
6. At the end of the previously set time, open the oven door and remove the
fat and solid remains with a slightly damp cloth.
7. For more embedded dirt, pour dishwashing liquid on a damp cloth and rub
until all dirt is removed, then wipe dry with a clean, dry cloth.
Inner light replacement
Warning: Before changing the light bulb, disconnect the oven from the
electrical network (plug or magneto-thermal switch). And make sure the oven is
completely cold.
Remove the glass shield by turning it counterclockwise, wear rubber gloves if
you have difficulty removing the glass shield.
Depending on the oven model purchased, the type of lamp varies, it can be
type G9 (Figure 1) or E14 (Figure 2). In the case of type G9, to extract the
bulb, pull it outwards, in the case of type E14, unscrew the bulb by turning it
counterclockwise.
(80 ºC) position.
/
).
12

Publicidad

loading