Specifications - Sony WAHT-SA2 Manual De Instrucciones

Specifications

Surround amplifier
(TA-SA200WR)
Amplifier Section
Mexican and Latin American models:
POWER OUTPUT (rated):60 W + 60 W (at
POWER OUTPUT (reference):
Other models:
POWER OUTPUT (rated):80 W + 80 W (at
POWER OUTPUT (reference):
Rated impedance
General
Power requirements
Taiwan models:
Mexican and Latin American models:
Other models:
Power consumption
Standby power consumption
Dimensions (approx.)
Mass (approx.)
3 ohms, 1 kHz, 1 %
THD)
120 W (per channel
at 3 ohms, 1 kHz)
3 ohms, 1 kHz, 1 %
THD)
167 W (per channel
at 3 ohms, 1 kHz)
3 - 16 Ω
120 V AC,
50/60 Hz
110 V - 240 V AC,
50/60 Hz
220 V - 240 V AC,
50/60 Hz
50 W
1.0 W (standby
mode)
0.18 W (turned off)
206 mm × 60 mm ×
256 mm (w/h/d)
with the wireless
transceiver inserted
1.3 kg
Wireless transceiver
(EZW-RT10)
Communication system
Output
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
Wireless transmitter
(EZW-T100)
Communication system
Output
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
Design and specifications are subject to change
without notice.
"S-AIR" and its logo are trademarks of Sony
Corporation.
• Standby power consumption 0.18 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-master.
• Packaging cushions are made from paper.
S-AIR
Specification
version 1.0
12.0 mW
2.4000 GHz -
2.4835 GHz
DSSS
DC 3.3 V, 350 mA
50 mm × 13 mm ×
60 mm (w/h/d)
24 g
S-AIR
Specification
version 1.0
12.0 mW
2.4000 GHz -
2.4835 GHz
DSSS
DC 4 V, 550 mA
DC 5 V, 15 mA
52 mm × 24 mm ×
95 mm (max 77
mm × 24 mm ×
95 mm) (w/h/d)
61g
11
GB