Descargar Imprimir esta página

Ceado barcult B185 Manual De Uso Y Mantenimiento página 20

Ocultar thumbs Ver también para barcult B185:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

20
5
Select the desired speed with the selector
(13 Fig.1a) for model B284 and, holding one hand on the lid, turn on the motor by pressing the
button
(Fig. 6).
Note: The numerical scale of the speed selection knob is indicative only and does not indicate the
engine speed range.
6
Most drinks require blending at high speed. Position the selector
speed selection knob (13 Fig. 1a) to low values only when preparing small quantities or when
using the blender just to mix the ingredients.
7
The "PULSE" function can also be used, that is "momentary" operation at full speed, by
pressing and holding down the button
Note: You can use the "PULSE" function when preparing thick drinks that tend to "float" or to break
up nuts or other ingredients that are unable to circulate in the working zone of the blades.
WARNINGS AND SUGGESTIONS
1.
The blender is also designed to crush ice and prepare FROZEN DRINKS from ice in cubes.
Remember that if you place the ice in the container already crushed this will greatly extend the
life of the appliance.
2.
The blender is designed to ensure perfect preparation of the FROZEN DRINKS recipes
contained in the international texts of the IBA associations. If you use the quantities indicated
in those recipes you will always obtain the desired consistency.
3.
Certain preparations may cause cavitation of the blender. This means the ratio of liquid to ice
is not correct. If this occurs, switch the blender off, remove the lid, stir the mixture with a spoon
and try
again.
4.
If you have to heat or chill a preparation made with the blender, do not place the container
directly in the oven or freezer. This could damage it. Empty the container into a suitable
for models B185 and B280 or with the knob
for the whole operating time desire.
GB
to "LOW" or the
vessel.
Fig. 6

Publicidad

loading

Este manual también es adecuado para:

Barcult b280Barcult b284