Descargar Imprimir esta página

Hedge Trimmer Safety Warnings; Additional Safety Information - Craftsman CMCHT810 Manual De Instrucciones

Ocultar thumbs Ver también para CMCHT810:

Publicidad

Idiomas disponibles

Idiomas disponibles

English
of the hedge trimmer while clearing jammed material
or servicing may result in serious personal injury.
e ) Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring or its own cord. Blades contacting
a "live" wire may make exposed metal parts of the
hedge trimmer "live" and could give the operator an
electric shock.
f ) Keep all power cords and cables away from
cutting area. Power cords or cables may be hidden
in hedges or bushes and can be accidentally cut by
the blade.
g ) Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.

Hedge Trimmer Safety Warnings

Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and result in
serious personal injury.
Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. Blades coast after
turn off. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
Carry the hedge trimmer by the switch handle with
the cutter blade stopped. Proper handling of the hedge
trimmer will reduce possible personal injury from the
cutter blades.
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
Check the hedge for foreign objects, e.g. wire fences.

DANGER:
Keep hands away from blade.
Contact with blade will result in serious personal injury.

WARNING:

WARNING:

WARNING:
and blade guard properly assembled to hedge
trimmer. The use of the hedge trimmer without the
proper guard or handle provided may result in serious
personal injury.

Additional Safety Information


WARNING:
tool or any part of it. Damage or personal injury
could result.
6
Wear eye protection.
Do not expose to rain.
Only use with bail handle
Never modify the power

WARNING:
Everyday eyeglasses are NOT safety glasses. Also use
face or dust mask if operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratory protection.

WARNING:
known to State of California to cause cancer, birth
defects or other reproductive harm. Some examples of
these chemicals are:
compounds in fertilizers,
compounds in insecticides, herbicides
and pesticides,
arsenic and chromium from chemically
treated lumber.
To reduce your exposure to these chemicals, wear
approved safety equipment such as dust masks that
are specially designed to filter out microscopic particles.

WARNING:
and/or disperse dust, which may cause serious
and permanent respiratory or other injury. Always
use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away
from face and body.

WARNING:
personal hearing protection that conforms
to ANSI S12.6 (S3.19) during use. Under some
conditions and duration of use, noise from this product
may contribute to hearing loss.

CAUTION:
its side on a stable surface where it will not cause
a tripping or falling hazard. Some tools with a
large battery pack will stand upright but may be easily
knocked over.
Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be caught
in moving parts.
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
BPM .................... beats per minute
V ......................... volts
min ..................... minutes
j
or DC ............ direct current
.../min .............. per minute
RPM .................... revolutions per
minute
A ......................... amperes
Hz ....................... hertz
ALWAYS use safety glasses.
Some dust contains chemicals
Use of this tool can generate
Always wear proper
When not in use, place tool on
W ........................ watts
Wh ...................... watt hours
n o ....................... no load speed
n ......................... rated speed
c
..................... safety alert symbol
h
..................... wear respiratory
protection
f
..................... wear eye protection

Publicidad

loading