Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels - Sony KV-EF29 Manual De Instrucciones

Notes
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
• Do not simultaneously connect video equipment to the VIDEO 3 INPUT
• If both S1 VIDEO and VIDEO of VIDEO IN 1 are input simultaneously, the
• When no signal is input to the connected VCR (or video equipment), the
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels
Notes
• When you use the TV for the first time, preset the channels by
pressing AUTO PROGR button inside the front cover.
• If you use a cable TV system, select "CABLE : ON" of the
PRESET menu before presetting the channels. (See "Changing
other PRESET menu options" on page 30.)
Now You Are Ready. . .
The channels are now automatically preset in your TV. To preset the channels
manually, see "Adding or erasing channels" on page 28.
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
output from the VCR to the program position 0 on the TV.
jacks at the front and the VIDEO IN 3 jacks at the rear of your TV.
S1 VIDEO is automatically selected. To view the video input to VIDEO IN
1, disconnect the S video cable.
screen becomes blue.
VIDEO 3 INPUT
VIDEO
S1 VIDEO ( MONO )
2
AUTO
PROGR
AUDIO
ONE-PUSH AUTOMATIC PROGRAMING
1
AUTO PROGRAM
1
MAIN POWER
MAIN POWER
1
Using Your New TV
5