Preparation Before Lighting - Sibir V110 Instrucciones De Instalación

PREPARAtIoN bEFoRE lIghtINg

The kerosene tank* is pulled out from the rear.
1 Release the lever arm.
2
2 Pull out the tank.
3 Check that the tank moves smoothly on the rails.
4 Remove the tank and flush it with clean kerosene.
1
*
The kerosene tank is available in two variants, one in plastic and one in sheet metal. The illustrations
show the metal tank but the plastic tank is handled in exactly the same way. The instructions in the
manual therefore apply to both tank variants.
5 Unpack the burner.
6 Remove the wick cleaner, if any, and put it aside.
7 7 Plastic kerosene tank: Remove the protective label.
7
www.sibir.com
2
5
copyright © sibir international