Maxi-Cosi Citi Modo De Empleo página 13

maxi-citi-euro-bw-1
Maintenance
Cleaning the shell
The shell may be cleaned with warm water and a gentle soap.
Washing the cover
• The cover must be washed by hand at a maximum temperature of 30° (see washing instructions on the back of
the cover). Do not use a tumble dryer.
• Removing the rim. Gently pull the sides of the rim outwards, releasing the snappers one by one towards the top
of the seat.
• Removing the cover for washing. Unhook the cover by releasing the tabs under the edge of the seat (fig. K).
Remove the thicker section of the cover, located next to the carrying handle. Thread the shoulder straps and the
buckle carefully through the slots in the cover.
• The cover can be refitted by using the above instructions in the reverse order. When replacing the plastic rim (fig.
L), the Maxi-Cosi Citi must first be placed upside down. Mount the rim and secure the central snapper at the top
of the seat and then one by one secure the remaining snappers. Check that the rim fits parallel all round the
shell. It is then fitted correctly. It is advisable to buy an extra cover when purchasing the Maxi-Cosi Citi, enabling
the seat to be used at all times (also when the cover is being washed).
Note! NEVER remove the energy absorbing foam.
Attaching the sun canopy to the Maxi-Cosi Citi
M
• When using the sun canopy in the car, always place the carrying handle of the Maxi-Cosi Citi in the carrying
position (fig. M-1).
• Fasten the sun canopy around the handle with the Velcro (fig. M-1), ensure that the handle is unobstructed.
• Ensure that the sun canopy is always fitted with the rib facing outwards, so your child cannot hurt itself (fig. M-
2).
• Pull the back of the sun canopy over the edge at the rear of the seat (fig. M-3).
Warranty
• The warranty period starts from the date of purchase and is valid for a period of 12 months. The warranty is only
applicable to the original owner and is not transferable. The warranty is only applicable to products that have not
been adapted by the user.
• In the case of any defects, the owner is required to return the product to the retailer. If the retailer cannot solve
the problem, he must return the product, complete with a clear description of the complaint and a validated pur-
chase receipt to the manufacturer. Exchange or return cannot be demanded. Repairs do not constitute an exten-
sion to the warranty term.
• The manufacturer is not liable for any damages other than those on products supplied or manufactured by Dorel
Juvenile Group Europe.
• No warranty is given if:
- the product is not supplied complete with the validated purchase receipt to the manufacturer
- defects are caused by misuse or maintenance which differ from that indicated in the instruction manual
- repairs are carried out by third parties
- defects are caused by neglect
- defects are the result of an accident
- damage or removal of any serial number is found
- if there is normal wear and tear which may be expected from everyday use
- the stated warranty terms and conditions have not been satisfied.
05-04-2001 15:28 Pagina 5
11