Setting The Time; Setting The Date; Using The Chronograph - Timex W223 Manual De Instrucciones

W223_Analog2_NA_EN.qxd
CHRONOGRAPH MODELS
TYPE 2
CHRONOGRAPH
MINUTE
CHRONOGRAPH
HOUR
HOUR
SMALL SECOND

SETTING THE TIME

1) PULL the crown out to the 2nd position "C".
2) Turn the crown to set hour and minute hands.
3) When the crown is pushed back to the normal
position "A", small second hand begins to run.
All manuals and user guides at all-guides.com
6/5/09
ENGLISH
CHRONOGRAPH
SECOND
PUSHER "A"
MINUTE HAND
CROWN
7
POSITION
B C
NORMAL POSITION "A"
PUSHER "B"
DATE
26
9:19 AM Page 26

SETTING THE DATE

1) PULL the crown out to the 1st position "B".
2) Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around
9:00 PM and 1:00 AM, the date may not change
on the following day.
3) After the date has been set, push the crown back
to the normal position "A".

USING THE CHRONOGRAPH

This chronograph is able to measure and display
time in 1/1 second up to maximum of 11 hours
59 minutes 59 seconds. The chronograph second
hand keeps continuously for 11 hours 59 minutes
59 seconds after starting.
MEASURING TIME WITH THE
CHRONOGRAPH
1) The chronograph can be started and stopped
each time pusher "A" is pressed.
2) Pressing pusher "B" resets the chronograph and
the chronograph second hand, chronograph
ENGLISH
27