Elapsed Time Ring - Timex W223 Manual De Instrucciones

W223_Analog2_NA_EN.qxd
CHRONOGRAPH
THE CHRONOGRAPH IS CAPABLE OF
MEASURING:
• Seconds elapsed up to one minute (6 o'clock eye)
• Minutes elapsed up to one hour (9 o'clock eye)
STANDARD CHRONOGRAPH
MEASUREMENT
• Press pusher "A" to start timing
• Press pusher "A" to stop timing
• Press pusher "B" to reset the chronograph to the
zero position
SPLIT TIME MEASUREMENT
• Press pusher "A" to start timing
• Press pusher "B" to split
• Press pusher "B" to resume timing
• Press pusher "A" to stop timing
• Press pusher "B" to reset the chronograph to the
zero position
All manuals and user guides at all-guides.com
6/5/09
ENGLISH
38
9:19 AM Page 38

ELAPSED TIME RING

If your watch is equipped with a rotatable outer ring
on the face, with numbers corresponding to minutes,
you can use this Elapsed Time Ring to time an activity
from the start, or to mark the ending time for the
duration of an activity.
TO TIME AN ACTIVITY FROM THE START:
Set the Start/Stop triangle at the time (hour or
minute) when you start the activity (As shown on the
left in the illustration shown below). At completion,
you can see how long the activity took.
ENGLISH
39