Publicidad
Idiomas disponibles
Idiomas disponibles
7. INTERPRETING CONTROLLER INFORMATION
A
C
B
7.1 Reading the Default Screen
The default screen displays the temperature measured by the temperature sensor, (Figure 9A) the relative
humidity percentage (RH) (Figure 9B) and the output expressed as a percentage (%) (Figure 9C). If an error
occurs, it may also be displayed. (See sections 7.3 and 7.4 for potential error messages)
7.2 Show System Time
1. Press the up key when in the default screen to show the system time.
2. Press the up key again to return to the default screen.
7.3 Interpreting LED Signals
B
A
C
GREEN LIGHT (Figure 10A)
A glowing green light indicates the controller is functioning.
BLUE LIGHT (Figure 10B)
A glowing blue light indicates the connected drivers are activated.
When the blue light is off, it indicates the controller output is disabled and LED systems are off.
RED LIGHT (Figure 10C)
A solid red light indicates a temperature safety shutdown has occured.
7.4 Interpreting Display Messages
TEMPERATURE SHUTDOWN
If the output reads "OFF", the temperature safety shutdown is enabled. The red LED indicator will
be illuminated. The room temperature must be brought down 2°C/4°F below the safety shutdown
temperature for the red LED indicator to turn off and the output percentage to return.
10
Visit eyehortilux.com for the latest installation instructions.
Publicidad
